Coaxial Fixed Termination

RFTYT 1W Coaxial Fixed Termination (Dummy Load)

RFTYT 2W Coaxial Fixed Termination (Dummy Load)

RFTYT 5W Coaxial Fixed Termination (Dummy Load)

RFTYT 7W Coaxial Fixed Termination (Dummy Load)

RFTYT 10W Coaxial Fixed Termination (Dummy Load)

RFTYT 20W Coaxial Fixed Termination (Dummy Load)

RFTYT 25W Coaxial Fixed Termination (Dummy Load)

RFTYT 30W Coaxial Fixed Termination (Dummy Load)

RFTYT 50W Coaxial Fixed Termination (Dummy Load)

RFTYT 100W Coaxial Fixed Termination (Dummy Load)

RFTYT 150W Coaxial Fixed Termination (Dummy Load)

RFTYT 200W Coaxial Fixed Termination (Dummy Load)

RFTYT 250W Coaxial Fixed Termination (Dummy Load)

RFTYT 300W Coaxial Fixed Termination (Dummy Load)

RFTYT 400W Coaxial Fixed Termination (Dummy Load)

RFTYT 500W Coaxial Fixed Termination (Dummy Load)

RFTYT 600W Coaxial Fixed Termination (Dummy Load)

RFTYT 800W Coaxial Fixed Termination (Dummy Load)

RFTYT 1000W Coaxial Fixed Termination (Dummy Load)

If the dummy load you need is not covered in the form, please contact us for details.

Coaxial Fixed Termination (Dummy Load)

Dummy load is mainly used to absorb the power of RF or microwave system or act as a false antenna in the system. It has wide working frequency band, small size and excellent electrical performance. It is mainly used for test equipment, repeater, indoor distribution system, etc.

Matched load is a single port microwave element connected to the terminal of the transmission system. It can absorb all the power of the reflected wave almost without reflection. According to its power capacity, it can be divided into low power and high power. The coaxial load is a terminator that absorbs all incident wave power. Therefore, it is equivalent to the characteristic impedance line connected to the terminal. The common matching loads are waveguide matching load and three board line matching load. Compared with the partial energy absorbed by the attenuator, the matching load absorbs all the energy, and the frequency band is wide enough. The resistance value of coaxial matching load is usually 50 Ω.

Highly reliable K-type RF coaxial load (terminal) is a precision microwave passive device to realize terminal impedance matching of microwave signal transmission path and complete absorption of coaxial transmission energy. It is assembled by connecting nut, washer, circlip, insulating support assembly, shell, four metal foil resistors, solder and gland, and can receive microwave signals from low frequency to 40GHz high frequency, Most of the absorption of signals is realized, which not only ensures the impedance matching of signals, but also greatly reduces the signal leakage of vacant ports and mutual interference between systems.Compared with the traditional K type load, the simultaneous interpreting device has the advantages of novel structure, high reliability, wide frequency band, low standing wave and ultra small size, and has excellent performance and wide application prospect.

RFTYT is Professional Customized RF Components Manufacturer with long history of producing RF Isolator, RF Circulator, RF Resistor, RF Attenuation Chip, Coaxial Load (Dummy Load), Coaxial Attenuator, RF Filter, RF Diplexer, RF Combiner, RF Coupler, Power Divider, Bridge, RF Amplifier, Coaxial Cable and other microwave communication products.

Since the dummy load needs to be customized according to your needs, please provide the following requirements when you send us inquiry:

(Mark * is necessary needed)

*1. The frequency range you need.

*2. Power requirement.

*3. Connector type

 4. Your special requirements if you have (VSWR, temperature, size, etc.)